-
Hello I am trying to build gr-BladeRF for the source by following the procedure on the github:
git clone https://github.com/Nuand/gr-bladeRF.git
cd gr-bladeRF
mkdir build
cd build
cmake ..
make …
-
While trying to use dump1090 with a bladeRF 2.0 micro xA5 I am getting multiple errors, seemingly related to the sample rate. I've tried with both the [hostedxA5-latest](https://www.nuand.com/fpga/hos…
-
Hello,
First issue, and new to bladeRF and the radio frequency world. Just received my bladeRF and enjoying it.
I am trying `./kal -Dv -s GSM850`, but I get the following error : `error: bladeRF…
-
Hi all,
I've managed to build the LTE-Cell-Scanner with BladeRF but every time i scan for cells i have the following error:
> @ubuntu:~/LTE-Cell-Scanner/build$ CellSearch -g 30 --freq-start 1.7e…
-
Hello, I am using ofdm-transfer recently. The project is now read-only. I have encountered the same problem you left in the issue page. I would like to ask how is your current progress on this project…
-
Hello,
I have both PlutoSDR and BladeRF. I wanted to upload your Github code as in the descriptions and run it over SDR. With PlutoSDR your code worked just fine, but not with BladeRF. The reason for…
-
make: Nothing to be done for 'all'.
-
Howdy Sylvain,
Is it possible to support the bladeRF in a future release?
73 REmi F6CNB/N5CNB
f6cnb updated
6 years ago
-
Hello guys,
I'd like to ask if is this code also compatible with BladeRF x40. I'd like to create SDR Z-Wave transceiver. Thanks.
-
I have been trying to BladeRF x115 work with SDRSharp without any luck. I tried with both a windows7 and a windows 10 machine but couldn't get it to work. I followed the following youtube link first.
…