-
### The problem
I use an ESP32 as an ESPHome Sensor - it uses BLE to get some data from a device & then pass it via WiFi to Home Assistant.
It polls BLE every 5 sec & updates over WiFi every 10.
Wi…
-
Serial: FR:RU2221...
I've setup the integration and let it run for about an hour
but I've noticed the data never gets updated after the initial
fetch upon HA startup.
I have enabled debugging:…
-
I have about 10 BLE temp sensors and after setup 10 scanners for 10 different names only last one scanning even when it's not connected in flow. How to gather data from multiple sensors correctly?
…
-
**Describe the problem you have/What new integration you would like**
Native support of BLE mesh technology.
**Please describe your use case for this integration and alternatives you've tried:…
-
Hi all,
actually only the sensors like below are being submitted via BLE.
Is it possible to also to off…
-
Summary:
I would like to propose the integration of Bluetooth Low Energy (BLE) support for Telegram mini-apps. This feature would significantly enhance the capabilities and use cases for mini-apps, e…
-
Unfortunately I couldn't find where else to write, so I'm writing to a similar project.
Please make DALY BMS (k-type) support for ESPHOME. Home assistant has a working project (https://github.com/p…
-
So I currently use the multiple BMS configuration. I have two batteries that I use your integration with, and I really find it useful. However, I discovered that lately, the bms0 is fond of going offl…