-
我的vps厂商给我的硬盘是基于Xen Virtual Block Device的命名为xvda这在启动阶段会导致找不到bootloader这就会很尴尬,也就是说根本无法安装,我想知道我能 自己添加驱动然后让该类型硬盘可以正确被识别吗
-
@radredgreen not really an issue, just wanted to let you know I appreciate your work with wyrecam, and we've forked the bootloader from openipc, fixed a lot of issues, and aded new features, maybe you…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
HI, bootloader has been erased. i cant flash with sd card, and cant connect over USB.
Can you share bootloader.bin with guide for flashing to recover my board?
Chipset my board:
STM32H723
VGT6
…
-
I have a 446 and I can get it into DFU mode no worries. (BOOT0 is fine)
It flashes klipper and reboots into it fine.
But if I remove the boot0 jumper, it just doesn't work.
```
make flash …
-
I'm trying to flash a Silab MGM210PA32JIA2 module (same used in the Yellow) connected to a raspberry pi 4.
the module is connected to the pi this way:
```
GPIO 8: TX
GPIO 9: RX
GPIO 10: CTS
GPIO…
-
I'm starting this issue being totally honest: I hate GRUB so my opinion on it may be biased, which is why I'm asking for your opinions, as you people are the main users of this project and I value you…
-
Are there any plans to implement efivar as a bootloader?
https://github.com/rhboot/efivar
For example, compiling the kernel with efi stubs and using secure boot direct to kernel.
-
**Describe the bug**
After unlocking the bootloader and the recovery flashing the device is stuck with "Downloading... Do not turn off target!!"
After manually force-rebooting the device to recovery…
-
Thanks for this useful utility.
Unfortunately when I follow the instructions, I'm not seeing intended / expected behavior. I see `Van Ooijen Technische Informatica Teensy Rebootor` in lsusb, and I …