-
With the current master changes, tried to build the example sketch in catena 4450 and catena 4612. While doing the step clear the FRAM and redo the provisioning.
Then join not happening, EV_JOINING …
-
Question: what is the suggested method/technique to use this library with an MCU that sleeps? I'm using it with AVR, and I sleep the MCU for blocks of 8 seconds. I've used this technique successfully …
-
Hello there,
I am currently using a TTGO LoRa 2.16 in order to connect to the The Things Network. I replaced all the fields on the example sketch (ttn-otaa) from my TTN console. It has already been…
-
**Describe the bug**
The device sends too many uplinks (at a 5s interval) at the beginning of the execution.
**Environment**
- LMIC: 4.1.1
- PlatformIO Core: 6.1.4
- Network provider: Chips…
-
Update: See [further below](https://github.com/lnlp/LMIC-node/issues/45#issuecomment-1173196192) for a more complete description of the workaround.
---
I have observed a bootloop after using the…
-
Hi! Is it possible that there will be support for the SX126x(especially 1262) chip? There is example for ping-pong comm between these chips but it would be quite difficult to implement lorawan into it…
-
Hello guys,
I need help with this because I am trying for a month now to fix this. I have a node device and I have done all the configuration according to [the github documentation of MCCI](https://g…
-
Hello :)
I just received my LILYGO V2.1 from the official store on AliExpress and I'm trying to get it working with my Neo 6M GPS dongle.
I've uncommented the required lines, connect the GPS ser…
-
Hi, I am on build v3.6.0 and flash it, but in my board it shown `BLTH: off`and I'm sure configured `BLECOUNTER` to `1`
I also found some issue in #921, but it seems the situation is different
I'm no…
-
Guten morgen,
ich hab das ganze in PlatformIO importiert.
Allerdings bekomme ich:
In file included from C:/Users/laval/Documents/PlatformIO/Projects/Bresser_TTN/src/BresserWeatherSensorTTN.ino:142:…