-
I was setting up two Sonoff Dongle Plus (CC2652P + CP2102N) units to use as routers and I didn't want to open them up to press the bootloader button inside so I followed the directions to use the " --…
-
Hello, can you please make one Hex File with USB Support and change LED‘s from -> to
PB1 -> PC7
PB2 -> PC6
PB3 -> PC5
PB4 -> PC4
for the Sanmulink SM14Z2538 6LoWPAN Dev Board
https://a.aliexpr…
-
I'm using the `SONOFF Zigbee 3.0 USB Dongle Plus,Zigbee Gateway TI CC2652P + CP2102N Zigbee USB Stick,Zigbee Hub for ZHA in Home Assistant or Zigbee2MQTT,Open HAB etc.`
i want to flash the newsest fi…
-
whenever i run command make for the cc2538 it gives this error:
LD build/cc2538dk/test-pwm.elf
/usr/lib/gcc/arm-none-eabi/10.3.1/../../../arm-none-eabi/bin/ld:build/cc2538dk/obj/cc2538.ld:1…
-
Hello,
Do you know if i can make mjs work on CC2538 with 512KB flash and 32KB RAM? I tried it on bare metal system without OS and it works flawlessly, but the problem is when i try to integrate it …
-
BeagleConnect project has a fork of cc2538-bsl called "cc1352-flasher" written by @jadonk and they added a few improvements:
https://openbeagle.org/beagleconnect/cc1352-flasher
https://git.beagl…
Hedda updated
2 months ago
-
Hi !
I still have the "Synch Issue" even after trying aroud ten times.
- My Zigbee Bridge Pro is successfuly flashed under ESPHome : I see it and can interact with it
- Version: zb-pro-version …
-
Dear all
I am now playing with Openmote-B in the latest Docker image running on my Ubuntu 22.04 laptop and Ubuntu 20.04 workstation; I tried to start with the simplest `Hello-world` example but encou…
-
Trying:
**sudo python ./cc2538-bsl.py -p "/dev/ttyUSB1" -ewv "CC2652RB_coordinator_20210120.hex"**
results in:
```
File "./cc2538-bsl.py", line 82
print(message, end=attr, file=sys.stderr)…
-
Anyone tested compatibility with the new CC2674/CC2674P/CC2674R and/or CC1354/CC1354P chips from Texas Instruments?
https://www.ti.com/product/CC2674P10
https://www.ti.com/product/CC2674R10
h…
Hedda updated
2 months ago