-
I have lots of IP cameras around the house and I was wondering if that work with this plug in here is a link to them
https://domar.com/atlas-ii-poe-2mp-30m-nightvision-varifocal-lens-cctv-dome-ip-…
-
I have a mixture of old and new cameras. Some do 19:9 and older ones will only do 4:3 aspect ratio. Is there any way to stretch or crop single video streams so they all fit together inside CCTV Viewer…
-
Create a high-level design document outlining the architecture of the new cloud service. This should include an overview of components, data flow, interfaces with other systems (e.g., CCTV cameras), s…
-
first of all thank you for all the work around your Lovelace resources. I'm using most of them
i have picture element with my house floorplan, I'm trying to show the cameras only for the administ…
-
Need to come up with a layout for the CCTV tab. Probably just go with a grid of cameras like your standard DVR, with the ability to select one to make it full-screen.
Any other thoughts?
-
Hello,
I have installed cctv 4k resolution 3840*2160 cameras from several brands on my installation (hikvision, ubiquiti, ankee) I add the cameras well, communication is going well. the problem is tha…
-
Hi there. I have setup the security section with door locks and pir sensors. At one point, it was displaying the status of each sensors highlight in red area. The green highlight is working as you can…
-
Just thinking about setting this up but i'm wondering how the software grabs the image?
I run a few Wyze cams but I currently use Mini hacks for the RTSP stream. I have bought a Pan 3 version but i…
-
Hi,
I setup 2 x IP cameras in home assistant by using the ONVIF Integration and generated the two related entities "camera.ipcam_profile1" and "camera.ipcam_profile1_2". I would like to have a "Camer…
-
Hi, there is a pretty big problem with the current versions,
It's impossible to chose a frequency above 2.17GHz
Since a lot of SDRs are capable of going higher than that (Eg: hackrf, limesdr, adal…