-
when update from v2.0.2 to v2.1.0 not pasring lora_pkt_fwd when MCU version V01.00.00
./boot -d /dev/ttyACM0
INFO: Configuring TTY
INFO: Flushing TTY
INFO: Setting TTY in blocking mode
INFO: Con…
-
### The problem
I've been debugging this issue for 2 weeks without a solution. I belive there must be a problem with basic station. The problem occurs when sending confirmed downlinks.
1. I sen…
-
I'm trying to build Basics Station on a Raspberry Pi 4 Model B running Raspberry Pi OS Lite 64-bit. I tried following the compilation instructions, but ran into errors on Step 2. I'm not sure if it ma…
-
Hi,
Thanks a lot for the great work on the sx1302_hal. I'm currently using the Semtech Corecell reference design (SX1302CSS868GW1) over USB with the Raspberry PI and would like to evaluate the SPI …
-
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-gateway-bridge) of this repository and believe that this is not a duplicate.
## Summary
Hi all,
It looks like th…
-
I encountered an issue with an older RAK v1.5 where the concentrator reset pin was 17 instead of 25, which is the default specified in the variant file for COMP-RAKHM. This was causing an endless loop…
-
Hi,
I am using RAK 2247 through SPI with my custom board. I am trying to use inbuilt LNS in my gateway and for that I have done all producers as per readme file.
When I run it using "/opt/ttn-…
-
We were having issues with the time sync on the regular LoRa Packet Forwarder and figured that we'd try this one instead.
The setup is as follows:
The gateway is custom and based on a TI SOC. It is …
-
Hi, I'm getting the bellow, when scheduling the downlink packets for the temporary multicast session created by Chirpstack FUOTA -v3 deployments. None of the several downlink packets gets on air. It i…
-
Hello there!
First at all, project doesn't build due to error: `include/kv.h:60:46: error: ‘std::string’ has not been declared
` which can simple fixed by adding `#include ` to **include/kv.h**
…