-
This tab provides the configuration for the WinKey based, internal CW keyer. A complete WinKey manual can be downloaded from:http://k1el.tripod.com/files/Winkey10.pdf. Thanks to Steve Elliott, K1EL fo…
-
I have a Bencher Iambic paddle plugged directly into the key input on the SDR radio. I had to enable the CWX/CWdaemon option in the GUI to make the keyer work, which then greys-out most all of the oth…
-
Hi,
I am going to build a cw keyer and I wish to use I2C display to save pins.
I have an I2C lcd adaptor module with PCF8574T chip on it, may I use it? Should I uncomment the following line?
**/…
-
# CW Code Practice Function
Since we have a CW decoder, can we add a function to enable the operator to key morse into the radio (with transmit turned off), and the radio then decodes and displays …
-
Several minor issues which are obvious copy-paste problems or spelling issues are observed.
I prepared and tested the fixes for several months now, and these seems to be fine now.
I can fix the…
-
I tried cec_0.20.packed.bin and the CW off-band problem was still not better.
cec_0.20.packed.bin
…
-
Feature Request: Add the ability to start callsign practice mode from command mode. I propose using C as the command to trigger it.
_I'll take a whack at this at some point unless someone beats me to…
-
Create a straight keyer for Project TouCans that can be controlled via a web page interface.
The project should use three relays, one for each input to the Project TouCans keyer.
**First steps: …
-
TCI is in its infancy, as such many features are missing, including xit/rit, sensors, audio/iq over the stream, and others
-
My hardware has the left paddle connected to pin-IO1 and the right paddle connected to pin-IO0.
And it works fine with the 2021.12.17.01 software.
Yesterday, I downloaded the new source code (2022…