-
Repro (on Mackie DL hardware):
1) Power up a DL32S mixer and set it to use its internal router to generate a WiFi network.
2) Connect an instance of Master Fader (5) to the mixer via the WiFi netw…
-
On Windows, after rebooting sensors, sometimes (quite often in fact) they will show up with USB2.1 connections when they become reconnected. This requires physically disconnecting and reconnecting the…
-
After rebooting (from terminal or otherwise), everything appears to shutdown correctly but then left with a blinking cursor on a black screen on the Pi.
Cycling power will start everything again as…
-
after turning off the monitor overnight, when the monitor was powered back on the display settings somehow changed from the default 720 to a much higher resolution with lots of flickering
-
### Describe the problem
Running on Pi Zero W2,
Working fine for a few days, then stops connecting to wifi (router says device is not connected).
Device is still mounted to tesla and recording duri…
-
First of all, thank you tinkergnome for this excellent software, it made my printers way much more powerful and pleasant to use!
I am running the Tinker-MarlinUltimaker2go-HBK-dual-16.12.1.hex on m…
-
### The problem
Removing devices from the Yolink App - and reloading the integration does not remove the devices from HA.
I tried power cycling the Yolink hub as well.
### What version of Home Ass…
-
Viktor Glatz's screen shot showed that:
![208184647-a42a4255-953c-4c70-8d3f-50d51b633d28](https://user-images.githubusercontent.com/744949/210898765-719f1425-e27a-4597-beaa-2cb0aaeab9bc.jpg)
The r…
-
Hello,
first of all, thank you very much for the project! It's awesome!
I have an issue with Garmin Forerunner 945 which can't read cycling power even though it's reported.
Steps to reproduce: …
-
In some cases the services do not seem to start (or suddenly stop). I.e. there is no failures in the logs or anything like that.
Service restart takes care of the problem.
One hypothesis is that…