-
Hi, first of all thanks a lot this integration works perfectly. However I’m facing an unresponsive lan stick several times a day.
The http page of the datalogger is not reachable , but data on Solis…
-
TO 210224, cold start, I2C has 5V on the vin. D7 is 0V.
after running power_switch,7,power_switch_status,1, D7 is 5V.
the vin of the 9548 is not
-
I've been working with Freematics One Plus in the last year, and updating to the last version I've seen some things that have improved but some things that I don't like.
- The timestamp has disappear…
-
With @bpbond @stephpenn1 @roylrich
Roy
* A generalized approach to sensor data, applicable to other parts of his SERC work
* New techs have good range of technical/programming skills
* New [NER…
-
The CSS in the LogConfigHtml[] PROGMEM variable contains "1px solid whtie"
Presumably this should be "1px solid white"
-
This is for ShineWifi-S but might apply for the rest.
I was messing around with my datalogger and found some registers that might be of interest. While the inverter registers are well documented, d…
-
There are multiple choices of better suitable ICs for the next DATALOGGER module version.
- [rp2040](https://www.raspberrypi.com/documentation/microcontrollers/rp2040.html)
- An standard ARM micr…
-
I bought this board https://www.sparkfun.com/products/20594 SparkFun DataLogger IoT with a SF TMP117 temp sensor plugged in the board. I am using the adafruit IO mqtt service. After configuring the pa…
-
I have an `AK9753` presence sensor breakout board from sparkfun (https://www.sparkfun.com/products/14349) but there is no support for that device.
Is there a way I can write a "driver" for that chi…
-