-
In the following message:
"" = I am the end of this command
is the REGISTER a different number for every cab you are controlling?
-
Hi
I would suggest some improvments for the lib ( I did not find a way to request by another way sorry for that!)
A/ Ability to support MAGTINYCORE "officialy" with CPU like ATTINY3217 3216 3227…
-
DGCBarcodeDecoder fails to decode a valid test result which is created using "1.0.0" schema. In particular, field "dr" (Date/Time of Test Result) was valid, but optional field in schema "1.0.0", it is…
-
*Sent by (marcus.pfeiffer@gmx.com). Created by [fire](https://fire.fundersclub.com/).*
---
Hi there… First of all, I’d like to thank you for making this fantastic product available in the public dom…
-
I am running into a compile problem.
I am trying to compile the motor decoder example file.
I am on a Mac with the latest version of Arduino IDE set for ATTiny85,16 MHz internal clock,ATTiny85 proc…
-
Hi there i have problem with my dcc++ i used baseStation 1.2.1..it's recognise loco decoder i can program loco decoder too but my throttle is not working....i tried the D command diagnostic ...it's go…
-
Brian - thanks again for the code. I've made a few receivers and transmitters and they all work great. I was wondering if it was possible to add a serial output from the decoder to a peripheral sound …
-
Looking at this trace, why is it counting the bits this way? Is it on our end or something in the protocol decoder? 2mHz scan on DCC++EX. This happens after every idle packet. Shouldn't it be 14 bits …
-
-
Luca, thankyou for sharing.
Did you foresee to port your code on an ESP32 ? I tested on a ESP32 DevKit1, I had no output.
The same device is ok withe DCCpp-EX-inspector code.
I tried to find such a…