-
Looking to use my stock Ender 5 Plus screen along with SKR Mini E3 V3 & Klipper. Installed Desuuuu's DWIN_SET on screen and Desuuuu's klipper branch. There is no "[dgus_display]" within the provided …
-
Hello,
First of all, thank you for the great project. I like using it very much.
It would be great if it were possible to shut down the Klipper Host, i.e. the Raspberry Pi, from the display.
May…
-
My printer has this home screen:
The about page displays:
Screen firmware ver…
-
I don’t understand to connect the MKS H43 with the Skr 1.4 Turbo…
Can anyone help me?
Thanks
-
I have been able to flash the firmware and nothing works. it will turn on and stay on the boot screen. I have the ski mini e3 v3 .
-
**Describe the bug**
Cannot set hotend past 100 for PID tune
**To Reproduce**
Steps to reproduce the behavior:
1. Go to PID screen
2. Click on temp
3. try to enter anything over 100
4. goes b…
-
Sorry for my bad English.
Hi, since you are planning to work on a new version I give you some points to work on.
In the Setting-> Screen, the back button points to the wrong page.
The line at…
-
OnEvent : [ A : 6500 | D : 0 | M : | R : 5a a5 83 65 00 01 00 00 ]
OnEvent : [ A : 6500 | D : 1 | M : | R : 5a a5 83 65 00 01 00 01 ]
OnEvent : [ A : 6500 | D : 0 | M : | R : 5a a5 83 65 00 01 …
-
hey,
first off: fantastic work, I had been trying to come up with something like this based on [this project](https://github.com/Desuuuu/DGUSPrinterMenu), but I never found sufficient time to suffe…
-
I'm trying to set up M600 for color changes between layers, running programs from Octoprint. The M600 command will work to position the tool head and unload the filament, but nothing I try will make i…