-
Based on my small sample of ATtiny13a chips (a few DIP, a few SOIC-8), the typical clock frequency is consistently lower than the nominal 9.6Mhz. The datasheet figure 19-60 shows a typical frequency …
-
* Description of issue
When using nidcpower, in this case with the 4140 4-channel SMU, it's possible to initiate handshaking by using the digital_edge_sequence_advance_trigger_input_terminal att…
-
The Thurlby 1503 bench multimeter now has batteries. However, it only turns on briefly and then seems to die.
-
We should have kit testing equipment available at the venue.
-
Hi there! I realy need some help. I connected everything together and the closed loop stepper does not move. The stepper i chose is this [https://www.ebay.co.uk/itm/DE-12N-m-Nema34-154mm-Closed-Loop-…
-
We need a multimeter
-
## Observation
I am seeing the gain of one channel change by >3 dB on a TechnoSystem v1.4 Booster (and potentially also a few other Creotech/TechnoSystem devices, although without good data).
Th…
-
Hi,
I'va got an ESP32_Wrover with External RAM enabled.
SPP connection (AT+BTSPPCONN) seems not working.
I enabled bluetooth :
AT+BTINIT=1
OK
then I enabled SPP :
AT+BTSPPINIT=1
OK
but wh…
-
## Mycodo Issue Report:
- Specific Mycodo Version: 6.39
#### Problem Description
Please list:
- Using waveshare ADS1256 8 ch A/D converter to monitor analog soil moisture sensors.
Sin…
-
Use the template below if you have an issue or want to report a bug. If you have a question or a feature request you can ignore the questions below.
### Expected Behavior
kW Output to be some va…