-
Hi,
I'm having an issue with using the DIN70121 protocol in conjunction with 2 Whitebeet ISO15118 Carrier Boards. One board is an EV board running firmware V01_00_06 and the other a EVSE board run…
-
Hi, I'm new to the group and I've just started working with FreeV2G.
I have purchased a WB-CARRIER-BOARD EI - EVSE. Update the firmware to version V02_00_01, clone the git repository and change to TA…
-
See V2G-DC-353 requirement.
The test now rejects this which is wrong.
See the example log below:
DEBUG 2022-08-17 15:19:53,402 - iso15118.shared.exi_codec (239): Message to encode:
{"V2G_M…
-
**Your Setup**
Platform: PEV / EVSE
White-beet module - WB-CARRIER-BOARD-EI 1.1
Firmware Version: i.e., V01_00_07
Host Controller Interface: SPI
Host: Own Implementation - NXP Controller
**Des…
-
**Your Setup**
Platform: EVSE
Firmware Version: V02_00_01
Host Controller Interface: Ethernet
Host: Own Implementation
**Describe the bug**
Originally posted by @IonelFratila in https://gith…
-
Hi @jpo-stx ,
I have a problem trying to charge a VW ID4 using WB module V02_00_01. The problem is the same if I use DIN70121 or ISO15118 for charging:
When EV sends Charge Parameter Discovery Reque…
-
It seems that Whitebeet struggles to communicate by way of DIN SPEC 70121. We have tested with and without our power electronics system, both with and without a real EV in the mix and cannot seem to g…
-
Hello,
I have strange issue with one command **17.9.1 Set Configuration**
I'm sending request to White Beet and I have response,that SPI frame is malformed.
Request
C0 27 A0 00 00 **10** C4 93…
-
Hi @jpo-stx,
I'm trying to adapt the host controller SW to the new version of WB V.02_00_00 (EVSE). Most of the V2G Service commands are changed or new, so I have to rewrite the charging process almo…
-
Hello to everyone,
I have been working on the WB-CARRIER-BOARD-EI ISO 15118(EVSE) module for a while. The vehicle I tested on is the Renault Zoe. I am running the host software on Eclipse.
Looking…