-
In the example Stridemax_dual.cfg it appears that pins
spi_software_mosi_pin: stridemax_dual:**gpio4**
spi_software_miso_pin: stridemax_dual:**gpio3**
are incorrect per your pin out diagram of th…
-
Whenever i flash the FW onto my Lolin ESP8266 NodeMcu 1.0m the flash goes through but the ESP doesnt connect to the wifi and if i open the serial monitor the ESP just keeps printing "⸮". I have tried …
-
**Is your feature request related to a problem? Please describe.**
I made a small **[RGBDuino test](https://wokwi.com/arduino/projects/317698296336351808)** and found out that I must set the neopixel…
-
As a quick test I added a very simple LED sequence to the audio code I've been working on. It seems that as soon as any information is sent to the LEDs it messes with the Audio, the LEDs still work fi…
-
"APA106, SK6812, WS2811, WS2812 and WS2813 that are commonly refered to as NeoPixels"
NO!
NeoPixel is a trademarked term by Adafruit Industries and has nothing to do with the parts mentioned. It…
-
Hey there,
I used Ambibox with my ESP8266 (WemosD1mini) and WS2801 led strip and wanted to change to your much better Prismatik version. It works well till I reboot my machine.
After that the St…
-
The APA102 is an RGB LED similar to the neopixel. They're easy to control with SPI, they're cheap, and they're getting more common.
They're used in Pimoroni's [Blinkt](https://github.com/pimoroni/b…
-
Is the ATMega4809 (Arduino nano every) going to be supported? I noticed that the Arduino nano IOT was already added but not the nano every.
I tried adding it myself but I couldn't understand the f…
-
Hi there,
This project exactly what I've been looking for.
Got it to build on my Raspberry Pi Model A (running raspbian buster), but I'm not getting any output. This is my config.yaml file:
```
…
-
Hello,
I hope I'm not being nitpicky, I appreciate all the work that you do and love your products.
The feather 2040 board neopixel is too bright, it has that kind of led intensity that it can c…