-
I've build a simple ESP32 board (pin compatible with MaxESP3, but only ESP32 and 2 TMC2130 SPI V3 from Bigtreetech installed).
I want to know how to enable StealthChop mode? I tried to set TMC2130S…
-
While searching in the Linux kernel source for a DTB overlay, or DT source to compile, for installing a DS3234-based RTC on a Raspberry Pi (using the SPI interface) I soon realised this RTC wasn't cur…
Exaga updated
3 years ago
-
The Waspmote v12 has the DS3231SN RTC, and RIOT has support for the DS3234:
```
$ BOARD=waspmote-pro FFLAGS_EXTRA="-F" make -C tests/driver_ds3234 all flash
[...]
$ BOARD=waspmote-pro FFLAGS_EXT…
-
This issue lists the status of all tests for the [Release Candidate 1 of the 2022.01](https://github.com/RIOT-OS/RIOT/releases/tag/2022.01-RC1) release.
Specs tested:
- [ ] [01-ci](https://github.…
-
Hi, i'm using your library for read a DS3234 date and time ( https://www.sparkfun.com/products/10160 ) from ESP12F_Relay_X1
board ( http://www.chinalctech.com/m/view.php?aid=472 ).
I flashed the "…
T0m92 updated
3 years ago
-
The time drifts very much, at least 30 seconds in 1 hour is observed.
One possible cause is junk data in the MCP7951X CRSTRIM and OSCTRIM registers. It can also be caused by an unreliable oscillat…
-
## Bug Report
**What version of Kubernetes are you using?**
![image](https://user-images.githubusercontent.com/19413892/123635110-f1603080-d823-11eb-82c8-2c8068926c60.png)
**What version of Cha…
-
For example, what would you replace
```rust
let dev = hal::I2cdev::new("/dev/i2c-1").unwrap();
```
with when using the [stm32f3xx-hal](https://docs.rs/stm32f3xx-hal) crate instead? Probably some…
-
There's now a HAL published on crates.io: [`embedded-hal`][] ([Introduction blog post][brave-new-io]). :tada:
[`embedded-hal`]: https://docs.rs/embedded-hal/0.1.0/embedded_hal/
[brave-new-io]: htt…
-
hi dear jomelo
entire program freezes when call LCDML.OTHER_jumpToFunc (in version 2.2.1)
(using stm32 in ram mode)