-
Hi,
For some reason, the dsmr_datalogger only sporadically is able to read data from the smart meter. When I connect manually over the serial port, I get a constant flow of data (~=1 measurement/s)…
-
Zou het mogelijk zijn om het gas gebruik berekend op de api te krijgen? Mijn doel is om het gas gebruik op een _24u chart_ te laten zien, telijk met energie gebruik en levering (home assistant).
Ik…
-
Following up on the conversation here: https://community.home-assistant.io/t/plugwise-smile-p1-integration-dsmr4-slimme-meter/47404/11?u=mvieleers
Attached are the xml files. I hope I did a good jo…
-
The smartmeters being introduced in Luxembourg (called 'Smarty') are derived from the Dutch DSMR4/5 Standard.
They use the DSMR5 physical P1 port and transmission Speed and similar telegrams, with …
-
Hoi Robert,
Ik heb een iungo lite met een modbus usb stick met hieraan een Modbus SDM630 V2 kWh meter in gebruik om het gebruik van de laadpaal uit te lezen.
Nu werkt de iungo lite goed, maar de M…
ezwep updated
5 years ago
-
Multiple users report DSMR4 not working since 0.46, even after reverted change due to DSMR5 changes (https://github.com/home-assistant/home-assistant/issues/7893).
Still under investigation for roo…
-
**Home Assistant release (`hass --version`):**
0.46
**Python release (`python3 --version`):**
Python 3.5.2
**Component/platform:**
DSMR
**Description of problem:**
After upgrading to 0.46…
-
As far as i can see, the code doesn't have a CRC check to look if the incoming telegram is correct. However, the modern >=DSMR4 meters include a CRC at the end of the telegrams. With the CRC16 these c…
-
The telegrams should be verified by checking their CRC. I'm planning to use #154 but that also lacks CRC checks, for now.
I should either re-check later or write it myself.
[Originally reported …