-
如题
常用软件只添加了一个 luci-app-easymesh
无线接口显示 设备未激活 无法扫描到任何信号,2.4G和5G都一样
-
能玩到iStoreOS的，家里肯定不止一台WIFI路由器，而且因为iStore OS所在硬件平台的算力优势，100%都是用了AP模式。把多个AP设备mesh组网，绝对是新装网络和旧网改造（提高设备利用率）的主要方向。不管是有线回程还是无线回程都能刺激iStore OS的安装。尤其是有线回程，能更好的发挥iStoreOS的硬件优势。
-
这个插件需要编译 不能直接ipk安装
-
该问题从去年到现在一直存在，AX3600、TX1800、NEWIFI3刷入都是一样情况
-
while compiling i am getting this error
i tried to change module selection but still cannot compile it . ! any one had this error ?
C:\Users\AppData\Local\Arduino15\packages\esp8266\hardware\esp826…
-
```
sketch\easyMeshSTA.cpp: In static member function 'static void easyMesh::stationScanCb(void*, STATUS)':
sketch\easyMeshSTA.cpp:107:40: error: 'next' was not declared in this scope
…
-
Let us assume we have 5 ESP connected as 1
-
### 详细叙述
编译斐讯K3，内核版本从5.4.267更新到5.4.268后查看内核日志都是
[73416.673269] ieee80211 phy1: brcmf_p2p_send_action_frame: Unknown Frame: category 0x5, action 0x0
[73421.690361] ieee80211 phy1: brcmf_p2p_send_act…
yflwz updated
8 months ago
-
大佬，最近的固件一直编译失败
-
I would like to connect to internet from any of the nodes in the mesh, and push some information based on the messages received by the node. Is there a way to do this?
I could not figure out if the n…