-
Hello,
Is there a way to access other ECU like mrs/srs or others ?
thanks
-
According to Aleksi Venäläinen, for the SRS and Denso ECUs on model year '99 and '00, the second byte of readDiagnosticTroubleCodes and clearDiagnosticInformation requests should be 0x11, and the ECU …
-
I have two revC h154 that pps2 stays at 0.5v regardless of pedal position.
PPS1 reads fine, but pps2 no matter the pedal position ALWAYS reads 0.5xV. This is both on tunerstudio and in reality with …
-
### Please provide a brief summary of the bug
Use openLCA calculation crash, please help me
[hs_err_pid4740.log](https://github.com/user-attachments/files/15509104/hs_err_pid4740.log)
[hs_err_pid21…
-
Hello,
Great work and paper! and thanks for publishing the code.
It seems that the ECU dataset is not available. Where can it be downloaded from?
Thanks!
-
`scan-reset` uses `wait_for_ecu()` to await the ECU coming online again. The case when the ECU dies is not handled. Allow `wait_for_ecu()` to raise a TimeoutException.
-
It's possible that I'm missing something about the workflow for getting data from the ECU to MQTT but I have the following question.
My understanding is that some CAN frames are automatically broad…
simg updated
4 months ago
-
Hi there.
I'm using 2 can bus adapter. One for the VCAL 250 and one for the Vitovalor. I've been using open3e since December last year on Buster and open3e on the vitovalor ran into a timeout every 3…
-
The issue? EGS CAN Layers use bit stuffing, and thus, certain values are not byte aligned.
Certain custom ECUs do not support bit stuffing on CAN, thus, it is not feasible to port any of the EGS CA…
-
## Context
In my limited understanding, some ECUs are not accessible on the CAN bus until the EZS firewall is disabled. This appears to be the case for some newer vehicles.
Apparently for offici…
jglim updated
3 weeks ago