-
-
Haiku doesn't currently boot. The bootloader returns `EFI_UNSUPPORTED`.
Probably some driver isn't included in our build that the Haiki bootloader requires.
See: https://github.com/riscv/riscv-edk2-…
-
## Overview
In the past, memory protection settings were configured via FixedAtBuild PCDs (Platform Configuration Database), which resulted in a build-time configuration of memory mitigations. This…
-
Wiki compilation instructions are outdated, please provide new compilation guidelines。
Wiki编译说明已经过时，请提供新的编译指南。
```shell
a@ENT:~/houji/6.1.25/Xiaomi_Kernel_OpenSource$ ./build_with_bazel.py -t kalam…
-
Currently the initial scratch space is in the UEFI FD image. I reduced the image size from 8MB to ~2.2MB and most of the second free area (green) is the scratch space.
We probably don't need to was…
-
This issue is about reducing the patch set of the SolidRun board support. The latest upstream U-Boot that works with the Marvell CN9130 CRB is 2022.01, start with that and add the device trees needed…
-
Current features detected under ARM are not always relevant, and probably there are relevant features that are not shown (e.g, #130).
A list of relevant features should be elaborated and the progr…
-
Hi. I'm making a laptop with my Pi 4 and I've decided to run Windows on it. I'm going to add a [Adafruit PiRTC DS3231](https://www.adafruit.com/product/4282) and I'm wondering if adding `dtoverlay=i2c…
-
The CM4 provides a PCI Express x1 Slot extension on the IO Board.
Is it possible to give support for NVME on the platform?
-
There is another PCR mismatch in the laptop, and here is the event that causes it:
```
::: 06100: event type=EFI_VARIABLE_DRIVER_CONFIG pcr=1 digests=1 data=71 bytes
::: --> EFI variable Setup-ec…