-
After [accepting the alpha version of the code](https://github.com/Koenkk/zigbee-herdsman/pull/317), now I propose to write comments here until we complete the development.
The adapter is designed …
-
## What happened
Z2M showed me, that my TRV have an OTA update available, so I've updated it's firmware.
https://www.zigbee2mqtt.io/devices/BRT-100-TRV.html#moes-brt-100-trv
After successfu…
wizu updated
8 months ago
-
## What happened
Moes BRT-100-TRV thermostat doesn't have its own firmware update yet, but Thermostat has received a wrong firmware update from a completely different Tuya thermostat.
Because of thi…
-
Home Assistant developer agners has begun working on an add-on for Silabs Multiprotocol stack requiring Multi-PAN firmware. See:
https://github.com/zigpy/zigpy/discussions/894
> _**For the Add-o…
-
@TheJulianJES reported strange behavior with a device re-joining during initialization and the initialization task somehow being launched *twice*, causing the device to complete zigpy initialization w…
-
Hi,
I was looking to flash E180-ZG120B-TB.
The firmware given here contains 2 version combined.s37 and .hex.
I want to flash using openocd and hence not sure if openocd today supports .s37 form…
-
Sorry for abusing you more then i wold like to do !!
I have problem with flashing tuya Zigbee GW with one working EZSP.
I have using your https://github.com/grobasoz/zigbee-firmware/tree/master/…
-
From /tmp (that being deleted after reboot and not saved in the flash).
`dd if=/dev/mtd0 of=/tmp/dmtd0.bin`
for mtd0 - mtd4
Install tftpd64.464 and confing your eth network.
`tftp -l /tmp/dmtd…
-
## The problem
Running Ikea on/off switches and remote controls with ZHA and Sonoff ZB Bridge on HA running on Proxmox. First of all, I want to mention the fact that the Ikea devices consume th…
ygreq updated
3 years ago
-
Any plan to support EFR32 for at least batch programming? I see EFM32 is already supported.