-
T#pragma once
// This file is where you choose the machine type, by including
// one or more machine definition files as described below.
#ifndef MACHINE_FILENAME
// !!! For initial testing,…
-
The stretch extension fails to transform spiro paths (neither bezier nor freehand), stars, or spirals. No error message is generated.
-
#pragma once
// This file is where you choose the machine type, by including
// one or more machine definition files as described below.
#ifndef MACHINE_FILENAME
# include "Machines/eggbo…
-
When attempting to make near-diagonal pen movements, the pen fails to move, though the API gives no indication of the failure. I'm observing this in cncserver version 2.9.1, operating an AxiDraw V3, r…
ghost updated
10 months ago
-
At the end of every plot, when the head homes to (0,0), it stops halfway in the middle of the page with the following error:
```
axibot.ebb.EiBotException: Unexpected response from EBB:
Command: …
-
I made sure, that the AxiDraw is properly connected to my Laptop and has power.
My system:
```
Ubuntu 16.04.4 LTS (Xenial Xerus)
Node: 10.5.0
NPM: 6.1.0
```
```
» cat config.ini
httpPor…
-
[eggbot.txt](https://github.com/bdring/Grbl_Esp32/files/14813730/eggbot.txt)
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NAME i…
-
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NAME in the title to some string that identifies your machine configuration.
IMPORT…
-
This will be for v3.0.0 firmware.
Exact syntax to be worked out, but a good starting point (thanks @oskay) is
`CM, dest_x, dest_y, center_x, center_y, rate, direction`
Where all of `dest_x, dest_…
-
I had the Problem hat I want to reverse the servo.
So I change the code in setPen --> Change Case0 to Case 1 und Case 1 to Case 0
void setPen(){
int cmd;
int value;
char *arg;
moveToDe…