-
Hello,
I am trying to run it on a virtual camera source (using [RTSP.to-webcam](https://github.com/apple-fritter/RTSP.to-webcam)) to make my CCTV Camera output to dev/video8, but its giving me the…
-
hello @fhoedemakers
i recently finish building your amazing project, everything works but when i try to start up a game a red screen flashes and the pico restart back to the sd card menu.
I als…
-
How are you guys getting away with using what appears to be a standard AT-cut crystal with the ATmega328PB on the Uno R4 board? Did you build those prior to the Microchip's change to get rid of the f…
-
Please consider adding Zeroconf support to cod.m ZigBee CC2652P2 TCP Coordinator for automatic ZHA network discovery.
Home Assistant OS (formerly HASSIO) supports automatic network scanning and “Se…
Hedda updated
2 years ago
-
Hey,
the OV2640 cam worked fine on our MEGA, but the requirements for our project changed and we've to work with Adafruit nRF52 feathers. I get the following error when trying to upload a test sketch…
-
For example, this [Release](https://github.com/AllanOricil/esp32-mfa-totp-generator/releases/tag/v0.6.0) has a build for the CYD. How can I configure esptool-js to use the release files, from .zip, an…
-
Hello beautiful people.
I work for a big ECAD software house, writing articles.
I would like to make a couple of articles improving the bus pirate V4 hardware.
Which features / improvements / b…
-
When trying to boot Jaspers Image for the Raspberry Pi Zero 2 W I get the following error:
` * Detecting disk device: /dev/mmcblk0
* Checking data filesystem: done
* Mounting filesystems: done
…
-
The list of chips that are nominally supposed to be supported by Optiboot seems to be growing quite long; much larger than I'm able to test myself.
I'd like to build a network of people who are willi…
-
Hi,
I am going to build a cw keyer and I wish to use I2C display to save pins.
I have an I2C lcd adaptor module with PCF8574T chip on it, may I use it? Should I uncomment the following line?
**/…