-
Was woking and installed but since a recent apt upgrade.
when trying to build via DKMS I get this error:
```
DKMS make.log for xr_usb_serial_common-1a for kernel 6.6.20+rpt-rpi-v8 (aarch64)
T…
-
Hello, configuration is not working in Home Assistant 2021.11.3 with error message:
`Modbus hub1 contains duplicate host/port 192.168.1.229_8088, not loaded!`
Does anyone have working config to…
-
Hi Steve,
I found your tracer project, it seems old but maybe I you can help me?
If have a solar panel connected to my converter EPEVER Tracer2215BN: http://www.epsolarpv.com/en/index.php/Produc…
-
I have a USB serial RS485 interface connected to my Epever PV controller Tracer3210A.
This is connected to a Mikrotik RB750 which supports access to the remote COM port over IP as per RFC2217.
I w…
-
Hallo,
EPEVER has a little device (eBox-Wifi-01) which connects to the RJ45 port of the tracer. After that you can use an Android App to read/set values.
Here: http://www.epsolarpv.com/en/index.p…
-
Would be great to have the chance to change the parameters of the MPPT over the app.
-
Hi,
I have a small script which change the slave default Modbus ID to another one (from 1 to 23 or any other unused ID) via write_register().
My issue is when it's done I got the following "error"…
-
Hi Aidan, you mentioned on C. Hickey's discord that you were having issues getting this running... can you elaborate?
-
**Support other MPP Inverters than PIP**
**Get other MPP or subbrand inverters running:**
-
Hi, I'm trying to follow the guide on monitoring my eprever mmpt. I
got the Epever CC-USB-RS485-150U (as labeled, see screenshot) Serial USB adapter. Trying to access
the MPPT with my Ubuntu 22.04.4…