-
SO the problem with Wifi duck is that you can pass limited line of script. Adding a SD Card module with it will help us to use it as simple USB Rubber Ducky if needed.
We can use DIP Switch or some…
-
Hello!
It's very useful to see the current print time in the main screen. As the printed time is already stored all you have to do it's at the begining of the print store that value in a new variab…
-
"To avoid interferences from the MCU, bridge RST to GND on the MCU too."
how to disable the mcu is not actually stated.
where is this chip? is it under the esp daughter board? on the rear of th…
-
Hardware: wemos d1 r1
SDK: v2.1.0-10-g509eae8
.ino:
#include
#include
#include
const char *ssid = "";
const char *password = "";
WiFiClient *client = new WiFiClient();
IPAddress cl…
-
Hello Sir,
I'm using Esp32 as a broker and the clients are esp12f(esp8266)
so how many clients can broker handle and any advice?
also how to set keepAlive time and socket_timeout time ?
Tha…
-
I try to use the library with an Arduino DUE (with the changes to avoid the conflict with Ringbuffer class) and I found that hw serials don´t work for subscription receiving using PubSubClient library…
-
Hello :)
I am working on a board that can easily control up to 5 pwm outputs or 1 RGB light an 2 pwm outputs using one ESP12f. It is all up and running using the FadeLed class (https://github.com/s…
-
### The problem
My display required a few weird things to get it looking correct. First was setting the offset to -24 on the Y. Probably has to do with how the chip is connected to the display. Not a…
-
Hello
Again thank You for the job :)
I've uploaded v.08 to espurna board but I still can't keep the values entered in the calibration permanently.
After using telnet and get pwrRatioC i got this…
-
Do you think it would be possible to flash an alternate (open source) firmware on this device, for example Tasmota? [This device](https://templates.blakadder.com/sonoff_ifan02.html) looks rather simil…