-
Is there any support for esp32-s2? If not, could you add it?
-
Seems that the DAPLink interface is not stable on my Muselab NanoESP32 S2 evalboard even if I set the adapter speed down to 1kHz, openocd log:
```
Info : Listening on port 6666 for tcl connections
…
-
Hello,
Any chance you can parse the S2 technical reference manual?
https://www.espressif.com/sites/default/files/documentation/esp32-s2_technical_reference_manual_en.pdf
-
[Micropython](https://github.com/micropython/micropython) already supports [ESP32, ESP32-S2, ESP32-C3, ESP32-S3](https://www.espressif.com/en/products/socs).
However [lv_micropython](https://github.c…
-
Using an Adafruit QTPy ESP32-S2 and Arduino IDE 2.0.0,
DS18B20 non-parasitic, wired with 4.7K pull up on DQ
Compiles & uploads fine but just keep getting the `No more addresses.` message over & over…
-
I have flashed my Flipper Zero ESP32 S2 Wrover dev board with Marauder and have attempted to attach a 128x64 OLED display to it.
Simple OLED [GND, VCC, SCL & SDA] and have included the required Adafr…
-
**Is your feature request related to a problem? Please describe.**
This is a request to add support for the very popular family of `Adafruit ESP32-S3 Feather` and `ESP32-S2 Feather` boards.
As we …
-
Are there any plans to increase MSC support here?
CDC+MSC may be great
Thanks
-
### The problem
In the SPI component :
- when try to use "interface: spi2", it is translate as SPI device, instead of FSPI.
- when try to use "interface: spi3", it is translate as FSPI device, in…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate.
- [X] Provided a clear description of your suggestion.
- [X] Included any relevant context or examp…