-
Hello, I'm having an issue just trying to get a minimal example working. I'm using [this](https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28), which has an ESP32-S3 onboard with 16 MB of flash and…
-
Actually only the ESP32 is supported
-
Hi,
I was able to successfully build und flash an ESP32-S3 with octal-SPIRAM, but I am not able to connect to the board after flashing the firmware. I think I am missing something, but maybe the sp…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
**Describe the bug**
Once 6 other peripheral interrupts are installed, the WiFi "timer_alarm_isr" interrupt allocation fails resulting in loss of WiFi functionality.
Without the watchdog enabled, …
-
Hi,
I use a custom board and I get "Configuration error 0x10000" - which means timeout initialising the SPI device.
But when I disconnect the other can bus device (works - verified) it initi…
-
[Micropython](https://github.com/micropython/micropython) already supports [ESP32, ESP32-S2, ESP32-C3, ESP32-S3](https://www.espressif.com/en/products/socs).
However [lv_micropython](https://github.c…
-
### Perform all steps below and tick them with [x]
- [x] Check the related part of the [Documentation](https://www.openhasp.com/)
- [x] Update openHASP to the latest version
- [x] Reproduce the…
-
hello, if you can help me to remap for ESP32 s3 wroom1 n16r8, really appreciated, watched all your videos, cant find solution. I made some .h videos but cant fit to 3mb flash.
![esp32-s3 wroom1 n16r…
-
[Latest commit](https://github.com/dasdgw/yoradio/commit/5d129c623c6b50a69bf8988753f4a0c9a5b0c970) in esp32-audioI2S-3.0.9i.
Clean git repo.
I'm not sure which pin creates these error.
```
…