-
The RF potential for this looks fantastic, but after adding a CC1101 board, I realized I don't have any compatible devices that are automatically recognized. It would be great if unrecognized devices …
-
Дорогие разработчики сделайте пожалуйста управление с помощью ИК пульта! Очень необходимо иметь резервный вариант управления.
Вот пример как это реализовано https://youtu.be/pA3S0u-X5SM?t=1104 (на ви…
-
Referencing this posting in the group from last year:
https://groups.google.com/g/rtl_433/c/Is2bSWStKlc
I purchased a few of these from AliExpress and am not having the same luck as previously r…
-
https://www.chbyron.eu/byron-dby-23510-wireless-bell-push-button-dby510-dby--23510
Currently detected as Smoke-GS558 when the button is pushed, but with varying data in the fields. I've captured t…
-
UPDATE: Best i could do based on code limitations is [below](https://github.com/merbanan/rtl_433/issues/3033#issuecomment-2292298947)
I have decoded and figured out the remote codes.
[bitbench](h…
-
### Current Situation
In the current version the sensor `[150]* Klimalogg` from merbanan's rtl_433 project is not listed as supported. In the source code I see, that it has OOK_PULSE_NRZS modulatio…
-
Hi Stef,
Great work, i would love to ditch the ATMEGA 2560 and run this on a Wemos D1 mini.
Is this possible, and how to connect the RFLink board: https://www.nodo-shop.nl/nl/41-rflink-433-mhz t…
-
The Dickert MAHS433-01 remote contains a user-accessible bank of 10 dip switches labeled "1" to "10" and each tristate dip switch can be set to one of three positions. These positions are labeled as …
-
Last week I received my RM2 Pro and did some reverse engineering on the data required for command 2.
I am using this mainly as an xPL to RF/IR gateway running on my router (OpenWRT/LEDE), therefore a…
-