-
How do you identify which found device is which in practice?
While I understand the point of the `known_list` etc, it seems prudent to label the ID with at least a comment of which sensor is which …
reedy updated
8 months ago
-
Not sure if this issue is with ramses_rf or evohome-Listener, but I have a Itho Daalderop CVE-S CO2 unit with AUTO RFT-N remote controls.
On the remote controls, I have the following options:
* L…
-
ramses_esp 0.34 onwards
MQTT
RX and TX stop (under stress?)
Serial comms shows repeated
```
Backtrace: 0x4201A546:0x3FC9B650 0x4201A6F2:0x3FC9B670 0x40377161:0x3FC9B690 0x400559DD:0x3FCACC20 …
-
[Mike Henderson](https://community.home-assistant.io/u/Mike_H)
[HA Community post](https://community.home-assistant.io/t/honeywell-ch-dhw-via-rf-evohome-sundial-hometronics-chronotherm/151584/3365?u=…
-
> -- EDIT BEGINS --
> The solution for v0.20.x and v0.21.x is to use: `ramses_rf.send_command` instead.
> -- EDIT ENDS --
Hi,
Have
- Nuaire Drimaster PIV
- Nuaire DRI-ECO-4S (4-way switch)…
-
I noticed that new package (2023.10.4) depend on missing packages:
**- dev-python/protobuf-python-4.24.3**
**- dev-python/pydantic-1.10.12:0** (upgradable to **1.10.13** in official portage)
and …
-
`2023-04-20 13:30:38.501 WARNING (MainThread) [ramses_rf.protocol.parsers] I --- 30:071715 --:------ 30:071715 10E0 038 000002FF1E02FFFFFFFF100107DF110A07DE496E7465726E6574204761746577617900000000 < …
-
Eavesdropping enabled to have HR80's present correctly in Schema (HR80 ID's not published by controller during discovery)
It appears the HR80's (once in the schema) then contribute to zone heat dem…
-
```
11:48:21.862 I --- 13:103760 --:------ 13:103760 3EF0 003 0000FF < Support the development of ramses_rf by reporting this packet (byte 5: )
11:48:39.094 I --- 13:107116 --:------ 13:107116 3EF…
-
First of all, my complements on the amount of work done in this and in the accompanying repositories.
At home I have an Itho HVAC system which I eventually want to integrate in my home automation s…