-
As of today we have to connect to all nodes one-by-one, open `vtysh` and run debug commands. This is a rather tedious process.
I'd like to propose an API endpoint on each of the monitoring containe…
-
#### Description
Poor performance and stability on EVPN L2 scale scenario
#### Steps to reproduce the issue:
1. On two switches configure L2 EVPN with single vlan and single VNI
2. On both swi…
-
Hi,all
Does bagpipe-bgp support l3 evpn,which when receive type 2 evpn route, mac route & ip route will be imported separeately according to two different RTs?
-
### Issue Summary
When configuring VRF BGP configuration in tenants, configuration is not rendred if the vtep key is set to false for the node_type.
The issue seems to be here: https://github.co…
-
### Description
This takes place in a bgp/evpn vxlan fabric with spine-leaf architecture and multiple-as e-bgp (each leaf and the spine have different AS).
When a leaf uses the same loopback addre…
-
installed frr on BlueField3 , EVPN works by configuring frr directly
but when using opi-api we get errors
same error happens on MountEvans on default config.
-
**Describe the bug**
When using EVPN with VXLAN, you could specify a custom route target for each vni in the evpn address family.
This works when entering via cli and will also get saved to frr.conf…
-
### Issue Summary
The dict key "loopback_ipv4_address" not resolve the inputs as variable, while other keys do, like "mgmt_ip" and "bgp_as".
## the AVD inputs:
l3leaf:
defaults:
platform:…
-
When clear the bgp evpn neighbor, then the vxlan evpn type3 routes would be deleted. And vlan member of tunnel bridge port was deleted and lead to flush fdb entries by vlan and tunnel bridgeport. But…
-
### Description
In my EVPN-MH setup, split horizon filters are not being implemented at the DF -- BUM traffic that is received on a shared segment at the non-DF will flood to the DF and be forwarded …