-
Follow up to https://github.com/itead/Sonoff_Zigbee_Dongle_Firmware/issues/28 for tracking as separate issue because also need a EmberZNet NCP 7.3.x.x firmware image for Zigbee2MQTT migration.
@Dan…
Hedda updated
1 month ago
-
@Daniel-zhan-itead @liangjia2019 @guozi7788 I like to suggest/recommend that ITead look at releasing an official Zigbee NCP firmware update image based on EmberZNet 7.4.2.0 version or later 7.4.x.x bu…
Hedda updated
2 months ago
-
I am running NCP on MGM210PA32 Module from Silabs. I have connected NCP to my PC over UART. Below is the log when I run my .Net application. I got an error "NCP requires unsupported version of EZSP". …
-
### What happened?
I decided to switch to ember driver on my SLZB-06M. I flashed firmware via OTA (20240510 ). Unfortunately Zigbee2MQTT fails to start... I have checked different baud rates but wi…
-
### What happened?
Frame changeSourceRouteHandler parsing error: RangeError: Attempt to access memory outside buffer bounds at new NodeError (node:internal/errors:405:5) at boundsError (node:intern…
-
### What happened?
It doesn’t start anymore.
no error message, just writing „starting“ in the logs.
the gui doesn’t get available.
### What did you expect to happen?
_No response_
### How to …
-
I like to suggest/recommend that Elelabs look at releasing an official Zigbee NCP firmware update image based on EmberZNet 7.4.2.0 version or later 7.4.x.x bug-fix version for your elx0x3 (ELU013and E…
Hedda updated
2 months ago
-
### What happened?
Unable to set On or Off state from Home Assistant or Z2M dashboard.
The device send it's state on plug succesfully but impossible to command it.
### What did you expect to happen…
-
### The problem
Since 2024.6.3 I sometimes (around once a day) find my HA unresponsive. I can connect via app/web, but it gets stuck on loading. I had this error before: https://github.com/home-assis…
-
### What happened?
I regularly get this type of message with my adapter: "Adapter disconnected, stopping".
In this case, Z2M restarts.
(Continuation of the conversation started here: https://gith…