-
I believe that the observed 1 second or so of delay when using `ping` with the `faradayio-cli` module (which uses `faradayio`) might be coming from `faradayio`. Investigate, document, and possibly fix…
-
Based on extension of https://github.com/FaradayRF/Faraday-Firmware/issues/75
@kb1lqc @reillyeon @jbemenheiser @el-iso
I've committed a quick commit that ties stdin and stdout from the OPUS a…
-
## Summary
aprslib provides parsing of scaling values and channel names. We should use these...
http://aprs-python.readthedocs.io/en/latest/parse_formats.html#telemetry-configuration
## Problem E…
-
## Summary
KB1LQC-1 Base Station was operating on a Raspberry Pi fine for almost two weeks. Once I placed KB1LQC-2, a RF station nearby, I caused a fault to happen and the aprs application quit
##…
-
RF Layer 2 packet does not support a callsign longer than 6 bytes. This should be updated to 9 bytes to match the longest expected callsign and suffixes. All other layers and programs support or will …
-
## Summary
I am planning to do some range testing of Faraday with my friend Kevin (KA9UBD). @kb1lqd Suggested that I post an issue to discuss the best methods to setup the test and how to collect use…
-
I am having issues connecting to and using the MSP-FET430UIF on Ubuntu. I can't seem to communicate with the device using mspdebug.
![image](https://user-images.githubusercontent.com/339144/3372245…
-
It's unclear if we should keep ADC data unscaled so scaling can be applied later or if we should always scale to volts at the ADC pin using the internal voltage reference.
Pros:
- Simple and easy …
-
I just became aware of [aprslib](https://aprs-python.readthedocs.io/en/latest/) which looks like it takes care of a lot of the APRS functions. Also, it's open source and [on Github](https://github.com…
-
## Summary
Using my forked checkout of the latest master (801c0d66323a90029889c96f8a894072b5831c46) I setup two Faraday radios and ran proxy connected to both of them. They were only sending out UART…