-
We should set the default traffic queue thingy to be fq_codel.
Also, we need to limit upstream bandwidth because otherwise we end up with ever-growing queues (I got over 27 _seconds_ in testing).
-
I have lately noticed that SQM does not always properly recognize cake at OpenWrt startup. The list of available qdiscs in LuCI contains then only fq_codel, but no trace of cake. Manually running `/us…
-
The current script for building up the hfsc/fq_codel hierarchy in lp-gw is garbage. The excellent [pyroute2](http://docs.pyroute2.org) library can be used to give this a proper implementation, maybe e…
ti-mo updated
8 years ago
-
#### Description
After a switch reboot, the interface appears as UP in the `show interface status` output but is displayed as DOWN in the kernel (`ip link show Ethernet0`). To resolve this issue, i…
-
So I configured flent to send 100 non-ecn'd flows, while sqm was fq_codeling at 40Mbit, with 4096 routes from rtod. Basically *all* babel packets get marked on every burst.
qdisc fq_codel 110: par…
dtaht updated
5 years ago
-
## Expected Behavior
When I click Status, it should show the status!
## Current Behavior
It takes a few seconds, then shows "no data". Once, a few hours ago, it showed the interface…
-
When trying to use multiple vfkit vms, only the first one seems to be connected to gvproxy, and the second one start very slow and finally do not get an ip address.
I see that podman is using gvpro…
-
[This](https://github.com/tohojo/sqm-scripts/blob/dd8c12ef68f3214332292096e68bae74c405b014/luci/sqm-cbi.lua#L116) sets fq_codel as default, but documentation on OpenWrt.org [here](https://openwrt.org/…
-
hi author, do you have any recommended configuration for performance? With the same environment, the download speed to easily reach 20MB. But, with kcptun-libev, no matter how the parameters are tune…
-
When using `ip`, it's possible to identify if an IP address is static or dynamic:
```
2: enp6s0: mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether e0:d5:5e:f3:41:f0 brd ff:ff…