-
Running on a Raspberry Pi 4 using the inbuilt BT adapter
I've attempted to use the switchbot_py3.py as well as doing this myself and get the following when sending the handles which it should be se…
-
When building with
`cmake -DGATTLIB_SHARED_LIB=NO ..`
gives this error
```
CMake Error at dbus/CMakeLists.txt:127 (install):
install TARGETS given no ARCHIVE DESTINATION for static library tar…
-
Hi would this bridge allow me to control a bluetooth light through home assistant? I've managed to sniff most of the codes for toggle, dim, rgb and temperature. I can also control it through gattlib b…
-
When i use connection = gattlib_connect(NULL, address, GATTLIB_CONNECTION_OPTIONS_LEGACY_DEFAULT); it takes about 4 seconds to connect. When i use the bluetoothctl utility it takes less than 2 seconds…
-
I have problem with running the gattlib nordic_uart.c example on an RPi4B+ using Bluez 5.50. The gattlib is cloned and compiled on the RPi according to the gattlib installation instructions.
I am r…
krimp updated
3 years ago
-
The provided example in the docs does not work. It shows the following error message:
`Traceback (most recent call last):
File "/home/user/Documents/Python/ASHA/test.py", line 4, in
devic…
-
Hello,
I'm trying to test read_write example with a bluetooth multimeter.
It works fine with gatttool : writing 0x0100 value to handle 0x015 make the device send data through notification handle 0x0…
-
hello,I have followed your guide and successfully install gattlib.
However,when i type it on terminate:
sudo python ble-scan.py
I received that:
Traceback (most recent call last):
File "scan…
-
I tried to scour the web for an answer before asking.
I have a BLE device that has one main char handle I need to write and read from.
on the Gatttool I did:
[04:A3:16:A3:E9:68][LE]> char-writ…
-
Hi,
I used **notification .c** code to test receiving data from Nexgo-POS-BLE device.It was able to recive correct data but was crashing with following error:
**Notification Handler: 30 30 30 30 3…