-
### Is your feature request related to a problem?
I'm frustrated when I want to use an infill type to make the object I am printing stronger internally (like triangles or gyroid) But there are times …
-
I use to select gyroid as infill path, very often when I modify another setting, the infill type get back to grid mode, it's pretty annoying
-
Grid infill is horrible for high speed printing and for whatever reason you have set it to default, the high speed collisions it can cause will bend hot ends and or destroy prints by knocking them loo…
-
### Description of the bug
Once perimeter width/spacing reaches a certain size, some rectilinear infill gets trimmed out and this causes gaps.
This is especially evident at lower perimeter counts …
-
**Requested Feature**
Always looking for a stronger infill pattern with low density and consistency through all axes, I'm a big fan of Gyroids. But there might be a new contender: Quasicrystals!
…
-
I am using Cura 4.5 (Windows 10) with an Ultimaker S5 and 3E. I have noticed over time that some prints take significantly longer than the Cura estimate. Until recently, I wasn't sure why. But I am…
-
conda install : master
I have bunch of twisted wires shown in the picture below. When I try to extrude them I get a segmentation fault.
Is it expected that extrude does not work with such wires?
…
-
Currently the Gyroid only allows to work on a .photon packed file.
My proposal is that we separate the import / export into helper tools
That way we can let the user choose the input / output ty…
-
### Description of the bug
When slicing large objects, PrusaSlicer crashes in some cases at the end of the slicing process.
### Project file & How to reproduce
## How to Reproduce
- Create…
-
### Description of the bug
Slicer hangs on "Preparing infill. 30%." when slicing larger files at 5% gyroid infill. Does not make further progress after multiple hours.
### Project file & How to repr…