-
Hi, I'm trying get Klipper/Mainsail control my printer, but can't configure CAN network(STM32F072 UCAN).
Getting this error with **modprobe**:
_modprobe: FATAL: Module can not found in directory /…
-
Hello,
I recently ordered an x96 mini and it seems to have an Allwinner H313 SoC and a SKhynix
H9TKNNN2G8A ram chips. I was wondering if any of the pre-built versions you made are compatible with …
iodn updated
4 months ago
-
I have an X96Q TV box, but I'm unable to boot either the h313.x96_q-SD-Image.img.xz or the h313.x96_q_lpddr3-SD-Image.img.xz on it. Upon monitoring the serial output, both images become stuck during b…
-
**Device Information | 设备信息**
- SOC: X96Q ( Allwinner H313 Quad Core ARM Cortex A53) 4 / 64 GB
**Armbian Version | 系统版本**
- Kernel Version: 6.1.57 or 5.15.135
- Release: bullseye
**Descri…
-
GPL requires sources necessary to fully rebuild a binary release be published as part of the release. The "source" tarballs on the release page are just a copy of this repository with no source, link…
-
Hi @warpme,
Insane project you have here. I got two X96Q LPDDR3 boxes booted off of your image, and also tagged you on your [minimyth2 repo](https://github.com/warpme/minimyth2/issues/48), but wanted…
-
Hi,
first thanks for the project, it's very useful!
I have an INEXT h313 board that uses lddr3, your sdimage h313.x96_q_lpddr3, boots and is stable, but has an issue, the ethernet doesnt work.
S…
-
Hello, i have X96Q TV box with H313, 2GB RAM and 16GB ROM. I'am not able to boot any of yours H313/H616 images. Image that should work - MiniArch-20231112-6.6.8-board-h313.x96_q-SD-Image.img.xz - ends…
-
### Before You Open ISSUE, Make Sure You have Read [Armbian Firmware Instructions](https://github.com/ophub/amlogic-s9xxx-armbian#armbian-firmware-instructions) and [Documentation](https://github.com/…
-
Hello everyone. A noob here. Searching the internet I found this repo.
Here in this …