-
All builds and installs fine.
According to similar GPIO wiring works fine.
After hacking hardware detection in rpihw.c, /dev/vcio is not found.
Is there another way to get it working on BPi?
Thx.
-
I have a Korg nanoKontrol hardware surface. It has a "mixer mode" preset in hardware where all the 9 faders transmit CC 7 on channels 1-9. This doesn't work with jack mixer, so adding a "MIDI channel"…
-
## Ready for you to start on
### Warm-up
_Each of you should work on these; with these I am mostly concerned with your learning and don't mind the duplication of work._
- [x] Read [Formal Abstr…
-
I was able to test the code now on a 32u4 Arduino Pro Micro with the T-CJ12. It seems to need a reinsertion when combined with usbguard after allow-device (maybe some hook to re-init hardware when the…
-
Is there a software option to disable the red LED?
This would save power while in deep sleep on battery power.
The schematics suggest that the only option is through hacking the hardware and cut…
-
Hello.
Are you still working on it? I was about to start hacking Zhiyun Motor as well and I was doing some research to not waste too much time on it. Did you reverse engineer the CMF-01 hardware? Do …
-
I saw on the home page README that you might be trying to get hold of a locator device to test with, but in case you can't find one, you might be interested in a project I came across on _Hackaday_ th…
-
I work on the latest firmware of yi camera 1080p home recently and I'm not quite good at hardware hacking. Since the firmware is encrypted, I can't extract the filesystem from the firmware. If you hav…
-
Please make it more clear that this needs to be paid for for it to be useful. Unbelievable waste of my time. Its one thing hacking hardware, but charging for hacked software (based on firmware that yo…
-
お世話になります。
NTT 10G-EPON C ONU をNTT(ISPはen光)のネットワークで使用していますが、SFP-ONUに切り替えたいと考えています。このGitHubリポジトリの情報を参考にすれば、NTTのONUから必要な設定を抽出し、Taobaoの「CIG XE-99S」SFP-ONUに交換して、NTTのネットワークに接続して使用できるでしょうか?
よろしくお願いします。…