-
(sysname='LoPy4', nodename='LoPy4', release='1.20.2.r3', version='v1.11-044dfea on 2020-12-23', machine='LoPy4 with ESP32', lorawan='1.0.2', sigfox='1.0.1', pybytes='1.6.1')
We've built an applicat…
-
Analyze energy consumption and the possibility not to have to plug the chime on an outlet.
-
**rp2** Hacking around with irq_disable/irq_enable
inspired by [Writing interrupt handlers](https://docs.micropython.org/en/latest/reference/isr_rules.html#critical-sections)
> This is an instance o…
-
Hi,
I restarted my HomeKit and tried to set up homebridge again. Getting this error.
Error: Cannot add a Characteristic with the same UUID as another Characteristic in this Service: 00000023-00…
-
### Basic Infos
#### Hardware
Hardware: ESP-01
Core Version: ?2.1.0-rc2?
### Description
I did not found any working example for WPS (WiFi Protected Setup) via push button switch.
So I p…
-
At the entrance to the building we will have a small screen that is _unmissable_ we will refer to as the **Welcome Display**.
The display will show a basic "Welcome Home {FirstName}" to the person wh…
-
# Hardware wise:
On 16.12.20 we received from the mail 2 more STM32F103 Nucleo-64 boards, 3 HC-SR501 Infrared IR Sensors and 2 OV7670 Camera Modules.
We found the Reference manual that can be used t…
-
Pierwszym głównym elementem naszego projektu jest budowa prototypu tzw. stacji oświetlenia ulicznego. Poszczególne stacje będą dysponować specjalnie zaprojektowaną do tego zadania płytką integrująca w…
-
After connecting the device to the wifi, correctly writing the chat-id etc ... I sent the message / start from telegram and he received all the possible commands safely. After about half a day, esp32 …
-
I have a brand new Rasberry pi 4.
Latest PI os
a HC-SR501 PIR Motion Sensor Module
here is my config. I have tried a few different modes. This one reflects the latest. They have all turned the scr…