-
![20220210_213110](https://user-images.githubusercontent.com/3359418/153516696-e00279ce-e536-46a5-a948-07704cf342f8.jpg)
![20220210_213130](https://user-images.githubusercontent.com/3359418/153516703…
-
Hi Roland,
when I was trying to flash Heltec Wifi_Kit_32_V3.1 with `spidr_1.1.ino.heltec_wifi_kit32_V3.bin` via Chrome and web.esphome.io, the device does not boot. The log shows "SHA-256 comparison…
-
### Category
Other
### Hardware
Heltec Wireless Tracker
### Firmware Version
2.3.10.d19670b
### Description
Performing a factory reset from the Android app on Heltec Wireless Trac…
-
### Category
Other
### Hardware
Heltec V3
### Firmware Version
2.3.11
### Description
Occusionally the heartbeat led flashes one sec on, one sec off. Then goes away after some min…
-
I'm trying to connect a BME280 sensor to Heltec WSL V3 using pins 3.3V or 5V, GND, no. 41 and no. 42 - instead of telemetry there is "g...t...r...p...P...h.. b....". When I connect the same sensor to …
-
Hi I installed tinyGS to my Heltec lora32 v3 board sx1262 lora radio but with 868MHz
I configuration there is no option for 868MHz only 433MHz
![Screenshot_20240415-122906](https://github.com/G4lile…
-
Heltec WiFi LoRa 32 V3 board, the latest V3.1 board, has no discoverable Bluetooth, with RNode firmware 1.72
On my phone, when trying to add a BT device and pair it, nothing shows up, I did activat…
-
The lora exemples works but the oledexemples dose not work. And vice versa if you down grade to 1.1.5
c:/users/valdt/appdata/local/arduino15/packages/heltec-esp32/tools/xtensa-esp32s3-elf-gcc/esp-1…
valdt updated
2 months ago
-
### SOC
ESP32
### Lora IC
HelTec WiFi LoRa 32 (V3)
### Product Link
https://wx4tc.com/?page_id=2792
### Description
This is being rapidly prototyped. It is NOT a new LoRA / microcontroller.…
-
I slightly modified the hardware (pull up resistors) and the pin out, so the code runs on a heltec wifi lora32 board. Is this of interest for you?