-
I appreciate the addition of the separate humidity sensor, that way I can create automations.
However, my dehumidifier consistently reports about 5% difference from the actual humidity. Is there a w…
-
Hi, First of all thnx for all for this project. I successfully assigned all the itho values via mqtt to home assistant. I have a question:
Is it possible to emulate the CO2 value or Humidity value …
-
### The problem
My generic_hygrostat repeatedly shows "became unavailable" in the logbook.
My current config;
```
# Kitchen dehumidifier control
generic_hygrostat:
- name: Kitchen Dehumidife…
-
There is a request to implement the SCD40 CO2, Temperature, Humidity sensor. Note to self: Requestor "JR" email 4/17/2024.
This is similar to the BME280, except it adds CO2 reporting instead of bar…
-
After last firmware and app update (August 15) the app only works with temperature and humidity sensor DHT11 (only shows that screen) and buttons are ignored. You need to reboot the device to leave th…
-
I have recently spotted that the humidity sensor values stopped to regularly refresh. After restart of integration, the refresh is done but afterwards no changes are happing (although in Gardena app, …
-
### The problem
seems to be raising as reported in closed https://github.com/home-assistant/core/issues/87464
using a Z-wave-js connected Co2 multi sensor providing the indoor temp and humidity th…
-
Sensors don't work again; Air Quality, Humidity and Temperature
This entity is no longer provided by the securitas integration from yesterday afternoon
-
Hallöle, hab das Projekt mal nachgebastelt und ein paar Sachen gefunden...
1. Der Schaltplan stimmt nicht überein bzw
Innen und Außenfühler sind vertauscht.
Es wird (15,16)
#define DHTGP…
-
Hello,
I just tested your app and saw that my temperature & humidity sensor was not discovered. Any possibility to add such sensor?