-
An open source / HydraBus USB packet sniffing would be really cool! The commercial USB analyser solutions are way above (my) hobbyist budget; HydraBus + OTG cable would be highly appreciated.
I know …
-
Hey! It would be nice to have some doc on hardware flashing of backed up BL.
Looks like my TS100 bricked after flashing `bootloader.dfu` v0.2
The device is not recognized anymore with some errors li…
-
hello, it is impossible for me to change the frequency in the spi module, I always get invalid frequency.
> spi
Device: SPI1
GPIO resistor: floating
Mode: master
Frequency: 320khz (650khz, …
-
I2C clock stretching support BBIO to be added (WIP)
https://github.com/hydrabus/hydrafw/wiki/HydraFW-Binary-I2C-mode-guide
-
Hi Team, I recently ordered a hydrabus for my hobby project and trying to communicate with my PN532 module via I2C. Then it turns out hydrabus doesn't support clock stretching in I2C, hence when PN532…
-
Some of the supported busses have the concept of addressable microcontrollers. For example, I've been looking at the one-wire bus. There is a mechanism to discover all IC addresses (which I hereby ref…
-
https://github.com/Xilinx/embeddedsw/issues/225#issue-1415371661
Please can anyone help me on this,??
-
It would be nice to make the BSP suitable for all CH56x
boards (like the official development board),
and enable the Hydrabus-specific parts with a compiler define.
-
I bought a HydraBus a few days ago and started to play with it:
```
> show system
HydraFW (HydraBus) v0.9-beta-115-ge463bc7 2020-01-29
sysTime: 0x046b48aa.
cyclecounter: 0x00809116 cycles.
cyc…
-
Check and Fix issue(s) found with CppCheck
https://github.com/danmar/cppcheck
It can be used in the workflow too https://github.com/marketplace/actions/cppcheck-action or maybe something better like…