-
Hi!
I have some software that is using i2c for the rp2040. Over a couple of months of continuous running there have been some failed transactions. Since these are rare, and, our i2c waveform is not…
-
Hi, I have my tablet's pen working on a downstream branch of linux mainline ( https://gitlab.postmarketos.org/panpanpanpan/sm8150-mainline ) and it will soon get supported by postmarket os and other d…
-
Linux kernel 6.11.6, intel iVSC firmware from 20240614, IPU6-camera-bins from 20240927, ipu6ep-camera-hal from 20240929, NixOS 24.11 distribution, Dell Precision 5680 with i7-13800H (Raptor Lake). Wi…
-
Hey, thanks a lot for this custom component. I realized that `custom_components/mcp23017/const.py` defines a constant number for the bus being used `/dev/i2c-#`. In my case this is not sufficient and …
-
**Is your feature request related to a problem? Please describe.**
Hi, are there any plans to support for magnetic encoders over i2c like the AS500
**Describe the solution you'd like**
Ability to…
-
According to contact with a variety of screen backlight control, can be classified as the following:
- GPIO Control
- High and Low Levels:
The backlight is controlled by a GPIO pin d…
-
[https://github-wiki-see.page/m/Koepel/How-to-use-the-Arduino-Wire-library/wiki/How-to-unlock-a-stuck-I2C-bus](url)
[https://www.forward.com.au/pfod/ArduinoProgramming/I2C_ClearBus/index.html](url)
…
-
I don't know what caused the stripes on my screen (about 20% of the screen) and I don't know if it's because of my configuration or not, but every video has the same problem. Currently, there is an er…
-
I haven't installed linux yet but I was testing the drivers from live fedora USB, the installation shows the following:
# Using the rust driver:
```
liveuser@localhost-live:~/asus-touchpad-nu…
-
Hi, if I remember correctly, a sensor that can read from the Pi's I2C bus has recently been integrated, I'm using a Suptronics X1202 UPS on my Pi 5, I would like to know if it is possible to read volt…