-
Hi,
I would like to use 2 audios at the same time to play a WAV voice feedback when I do a specific action while listening to a main audio MP3 file but It actually doesn't work when declaring:
```…
-
### Board
M5Atom Echo.
### Device Description
M5Atom Echo.
### Hardware Configuration
static const int8_t NOT_A_I2SPIN = -1;
const uint8_t I2S_SCK = 19;
const uint8_t I2S_WS = 33;
…
-
### The problem
Hello,
I'm setting up an ESP Voice Assistant and it works only once.
The only solution I found is to either restart the ESP or to reconfigure the device from the integration panel…
-
### The problem
I am using esp32-s3-devkitc-1 connected to INMP441 Microphone and MAX98357A Audio Amplifier.
I am using the esp-idf to implement voice assistant with micro wake word.
Th emicrophone…
-
### Problem Description
I was trying to set microphone input gain on ES8388. I noticed that I am having I2C communications errors at the end of the setup:
```
I2SCodecStream i2s_st…
-
Hi,
Is there any technical reason why I2S is missing from the ESP32-C3 build? Is there a likelihood it will be included in the future?
Many thanks
-
Hi,
I have WS32-ETH01 board im trying to use it as VoiceAssistant throught PCM5102 DAC
This board support i2s audio?
Its working on esp32-wroom but not o eth01 module, the leds on eth port turn o…
-
I want to use a routine to read data from digital microphone and save it to sd card, but the routine uses chip reading microphone inside, my current microphone is directly i2s directly read 24bit raw …
-
on F401 I setup I2S in slave,fullduplex mode with circular DMA,
issue
```
__HAL_DMA_DISABLE(&hdma_spi2_rx);
__HAL_DMA_DISABLE(&hdma_i2s2_ext_tx);
__HAL_I2S_DISABLE(&hi2s2);
```
inject more I2…
-
我最近在尝试开发语音对话。
当我使用audio_player_play从http连接缓存下来的语音文件时,语音唤醒可以正常工作。
但是,其他代码都不改动的情况下,使用i2s_stream的pipeline播放http语音文件链接后,就无法再唤醒设备了。
所以我想确认一下,是不是i2s_stream的pipeline播放http语音链接后,会导致sr语音唤醒失效?
附件是我的audi…