-
Hardware interface(s) Examples Missing hence for New starter it is difficult
I2C
I2S
SPI
Native USB
UART
PWM
ADC
GPIO
USB CDC
Also LovyanGFX versatile for MJPG/ JPG codac …
-
Here's hoping this is a simple question, that I'm just being daft on... Following the tutorial I've put together a wyoming satellite. The led's light up when I speak to it, I can see in the debug wi…
-
### Compatible Device
- [X] I'm running Raspotify on a compatible Device
### Are you sure?
- [X] I'm not trying to run Raspotify on a ARMv6 device
### Compatible OS
- [X] I'm running Raspotify on…
-
**When streaming WAV format:**
OpenAI sends 24kHz PCM chunks
We add WAV headers specifying 24kHz
Library reads 24kHz from WAV header
**_But plays too fast_**
**Same library works correctly …
-
### What happened?
**3.5mm audio jack & microphone** do not work
Though these hardware works in `mainline` kernel 6.6.4 as [mentioned here](https://github.com/defencedog/orangepi3b_v2.1/tree/main/…
-
**Describe the problem you have/What new integration you would like**
Please look at adding standardized volume control configuration for external DACs with integrated [PGA (Programmable Gain…
Hedda updated
1 month ago
-
### The problem
I am using the ESP32-S3-BOX (non 3) firmware from esphome/firmware. However, after updating to esphome 2024.5 I get no voice return. The text on the display does come up correctly and…
-
### The problem
When installing the YAML i get these errors below regarding microphone and speakers. Only on ESP32-S3 devboard. Microphone is not working. "Same" code on ESP32 devboard works.
``…
-
## Environment
- Audio development kit: CUSTOM
- Audio kit version (for ESP32-LyraT/ESP32-LyraT-Mini/ESP32-S3-Korvo-2): N/A
- [Required] Module or chip used: ESP32-WROVER-IE-N16R8
- [Requi…
-
Hi,
I have WS32-ETH01 board im trying to use it as VoiceAssistant throught PCM5102 DAC
This board support i2s audio?
Its working on esp32-wroom but not o eth01 module, the leds on eth port turn o…