-
老师您好,我想向您请教一个问题,使用transformer处理高光谱图像时,需要把一整张高光谱图像分成很多个patch,如IP数据集的H=145,W=145,patch_size=x, 如果不能分成整数个patch(即图像大小和patch大小不能整除)怎么解决呢
-
您好,请问您是怎么将原SAR和MSI数据进行归一化操作的呢?原图数据范围层次不起,分布不均,但是我看您处理后的数据都在[0,1]范围内,可以告知具体的操作方式吗?谢谢
以下是某些SAR数据某些通道的数据分布:
![image](https://github.com/danfenghong/IEEE_TGRS_MDL-RS/assets/95175307/95ed2f1a-e7d3-4a15-a…
-
洪老师您好:
我们的论文想要将您的论文作为对比方法进行比较,根据您开源的代码,以patch-wise spectralformer为例,在Indian pines数据集下,以3%作为训练集随机抽取,并使用PCA将bands降为3后,得到的测试精度大概在61%左右,为了避免失误,向您确认这个结果是否准确,我们将会在论文中引用您的文章。
-
您好,请问论文中展示的的实验结果是如何选取的呢(例如重复5次实验取最佳结果),我在文章中没有看到相关说明。
-
请问,可以提供论文吗
-
老师您好,首先非常感谢您的研究成果,为后人的研究提供了思路。
我在看数据集处理时,您的Indian Pine数据集IndianPine.mat文件,与官方给出的Indian_pines_corrected.mat和Indian_pines_gt.mat文件还是有所差别。我已经通过MATLAB软件打开进行查看,但是由于数据量太大无法查看完整。
我想请教的问题是,您是使用什么方法将两个…
-
A typo in Liu, F., Chen, D., Guan, Z., Zhou, X., Zhu, J., Ye, Q., ... & Zhou, J. (2024). Remoteclip: A vision language foundation model for remote sensing. IEEE Transactions on Geoscience and Remote S…
-
老师您好,我们使用这个代码建议的步骤进行训练时得到的精度,与使用该模型测试得到的精度一致,是否可以认为在训练时就利用测试集进行了测试,最后打印的是测试精度?另外,我们想要使用您处理过的数据集进行自己模型的训练,并且进行引用是否可以?
-
Dear Dr.Hong:
Thanks a lot for you sharing code. I ran your demo for training on Indian dataset twice, the test accuracy is about 76%, which is not as accuracte as your paper, here are the result…
-
Hi Danfeng,
thanks for your sharing the code! Today, I tried to use the draw_ClassificationMap.m to draw the class maps and the code stopped at the line Pred_TE(:, x) = ind. Can you explain what mean…