-
[User_Setup.zip](https://github.com/Bodmer/TFT_eSPI/files/14734608/User_Setup.zip)
I am using the esp32 with the ili9341 display. I tried to upload the Test_Touch_Controller example. I try to uploa…
-
First thing first, thank you for your work :) This repo has an amazing doc. I'm pretty new with raspberry pi, so if I need to share some other info, please tell me 👍🏼
I'm building a GBA mod with t…
-
Hi,
I had a little issue with the touchpad, which in principal worked but the buttons and the touch location were not matching.
This could be traced-down to the coordinate calculations in tft.cpp, s…
-
First of all: thanks for the LUMA solutions.
I am trying to run some python program with the new software platform RaspiOS 12 (bookworm) on the raspberry pi4.
All the programs runs correctly on 11.9…
-
i am testing with stm32f103c8t6 and ili9421 combination, problem is when trying to display a counter (numbers) , for example - to display countdown number 110 to 1 , after "100" display sh…
-
Hello Bodmer,
I have now tested a few things, without DMA all is working fine but slow.
Tests with the `DMA Example --> boing_ball` were not successful.
The grid is showing but the ball not.
Whe…
-
`python make.py esp32 clean submodules mpy_cross BOARD=ESP32_GENERIC DISPLAY=ili9341 INDEV=xpt2046`
```
/Users/tbe/esp/lvgl_micropython/lib/micropython/ports/esp32/machine_hw_spi.c: In function '…
-
i built a firmware for ESP32 GENERIC S3 (ESP32-S3-WROOM-1)
python3 make.py esp32 submodules clean mpy_cross BOARD=ESP32_GENERIC_S3 DISPLAY=ili9488 INDEV=xpt2046
by using this command.
binary file c…
-
I apologize for the annoying intrusiveness in my questions, but I am completely confused...((( TFT 3.5" ILI9488 display (320x480) is successfully connected to the Raspberry Pi Zero W2 and displays an …
-
Hi,
I'm using the library with a teensy 4.1 and ST7920 display. Now i like to use it with a ILI9341 display. ILI9341_t3 library seems not be supported - but TFT_eSPI seems to be fine.
So i te…