-
While investigating potential approaches to #19904 I found an issue with the way the current binding generation works with multiple compatibles.
Standard practice in a node is to specify device com…
-
Currently, if the hf driver fails to recognize the JEDEC ident info it reads from the QSPI host flash, it does this:
```rust
if log2_capacity.is_none() {
loop {
// We are…
-
**Dasharo version**
Dasharo v1.1.3 (RC? Not dated) for MSI PRO Z690-A WIFI DDR4
**Hardware compatibility**
Pretty much same system than here: https://github.com/Dasharo/dasharo-issues/issues/158
…
-
## Bug Report
#### Describe the bug
I'm using a SAMD51 custom board where I have defined a custom SERCOM for SPI. My SPI is SPI2 and I'm using the SST26 chip. I know the SPI2 class I'm using w…
-
Currently XMP is not supported. The fastest timings for JEDEC DDR4-3200 is CL20, and so far I only found HyperX memory that would fit this criteria. There are so many memory that uses XMP Profiles, …
-
IIUC, DDR5 memory modules have standartised built-in temperature sensors (https://www.jedec.org/standards-documents/docs/jesd300-5b). It would nice to display memory modules as part of the memtest86+ …
-
While trying to identify/read a 8KB FeRAM device MB85RS64V, the JEDEC ID is properly identified (0x04 0x7F 0x03), but the python code then goes into an infinite loop grabbing JEDEC ID again and again …
-
If I try to initialize sensor I get an error: `Unknown flash IC. JEDEC id=ff:ff, size=4096x0`.
Full log:
```
$ sudo validity-sensors-tools -t initializer
Found device
Downloading https://d…
-
Hi Oleg,
are You planning to do some flashROMs for 32 DIPs in near future? Need some with non-JEDEC Pinout as these are getting pretty rare...
I understand that another adapter will be needed to be …
-
I'd like to add support for new machine.
Firstly, I added file to support the RV1106 processor:
```
require conf/machine/include/arm/armv7a/tune-cortexa7.inc
require conf/machine/include/rockchip-…