-
when there are multiple computers on a network, it is possible to have JMRI running and a firmware update be happening over the network from another computer.
I am getting NPE in the JMRI console w…
-
Issue Type: __Bug__
After limited the function people can see
I uncheck the Visibiliy check box, and save,
Open the webthrottle for the locomotive and the function still exsist.
reope…
-
These issues are in the JMRI monitor. It's unclear whether this is a problem in the parsing codebase of openlcb.jar or in the JMRI monitor code though.
- Node initialization with MTI 0x101 is displ…
-
Using a Raspberry Pi 2 and getting the error. Seems to be in JMRI.
Suggested fixes and comments from JMRI site provided below:
The good news, maybe, there's a workaround until the bad news can be r…
-
Issue Type: __Bug__
Service Mode Programmer SPROG Programmer is online, No operations mode programmer available, Programmer status stopping due to error Short ciruit on programing track (309)
…
-
I am working on a G scale layout that has CS3 as its controller. We are adding a second unconnected circuit and some storage loops for each circuit, plus train-on-track detectors, train position senso…
-
This approach makes a lot of sense to me.
I think that the 100% most valuable hardware to produce first (if you want buy-in from the modeling community) is the MQTT-LCP-DCC bridge specifically for …
-
I can't be alone in experimenting with RailCom.
One feature RailCom allows is reading of CV values "on the main", and the value is detected by a "Channel-2" reader.
To make experiments ea…
-
I have discovered a strange behavior on my ESU MCII with Engine Driver app.
When I use a throttle from JMRI with the same engine number as on ESU MCII, and set speed step in JMRI throttle to 28, then…
-
Dispatcher not work properly. I setting auto allocate option but only allocate one section "South main B25". If I setting allocate manually, the train start to run but "Auto restart" or "Reverse at en…