-
Greeting. I am trying to follow this ADSB implementation but when trying to "make" I get the following error message (Mac OS X El Capitan, gcc (MacPorts gcc5 5.4.0_0)):
gcc -o bladeRF_adsb bladeRF_ad…
-
When trying to tune to frequencies below 300Mhz using BladeRF 1.0 with the XB-200 extension board enabled, the following error message is shown usuallly:
`[ERROR @ host/libraries/libbladeRF/src/board…
-
During testing in Windows with the CyUSB3 driver, I've been experiencing problems with the TX stream receiving transfer completions from the CyUSB3 driver consisting of NULL buffers when attempting to…
jynik updated
6 years ago
-
Hi guys. I'm trying to do a GPS receiver with bladeRF x40. To do it, I am employing this configuration file [gnss-sdr_GPS_L1_bladeRF.conf](https://github.com/gnss-sdr/gnss-sdr/blob/master/conf/gnss-sd…
-
Please join and help to fix configuration script, see the following discussion:
https://bugs.gentoo.org/show_bug.cgi?id=606598
Cheers
-
Hi! I'm trying to build my own gsm base station on Ubuntu 18.04 with bladeRFx40. After installations of YateBTS and BladeRF; I configured Radio.Band, Radio.C0, Identity.MCC, Identity.MNC, Identity.LAC…
-
first time I ran into this issue: any ideas on causes?
BladeRF microxA4 on Ubuntu 23.04
gnuradio 3.10.5.1
bladeRF-cli version: 1.9.0-git-368f0ac9
libbladeRF version: 2.5.0-git-368…
-
Hi there,
I'm trying to run kalibrate-bladeRF on my x40, i tried to run it over GSM850 and GSM900 but still no result shown, even i tried with -m. here are some info relate with my stuff
./kal -…
-
I am having an issue with quick tune and it's respective functions.
I have downloaded [https://github.com/Nuand/bladeRF/blob/master/host/libraries/libbladeRF/doc/examples/quick_tune.c](quicktune.…
-
There are "actual" sample rates returned by `bladerf_set_sample_rate()` that will result in `BLADERF_ERR_INVAL` or invalid values when attempting to set these rates via `bladerf_set_rational_rate()`.
…
jynik updated
6 years ago