-
It would be a great upgrade from the T-display which is supported to this one. The ESP32 S3 is supported in the later version of esptool which I don't believe brewflasher is using yet.
-
Device crashes at boot.
Open issue in Arduino repo https://github.com/espressif/arduino-esp32/issues/9618#issuecomment-2113344119
and
https://github.com/Xinyuan-LilyGO/T-Dongle-S3/issues/26
-
https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/assets/104589489/99293511-a4d7-4280-902b-2e51358cc181
Board: V1.2 T3-S3 2.4gHz Lora with PA
This SMD component is getting really hot whilst c…
-
Hi,
I just picked up an interesting and cheap FPGA board - Lilygo T-FPGA with an Gowin GW1NSR-LV4CQN48PC6/15 and an ESP-S3 as an IoT solution.
Interestingly this board seems t use the relatively…
-
First of all, thanks for the great project!
I would like to know which HW version of LilyGO T-RGB device I need to order to reproduce your bike computer.
On LilyGO I have seen at least three HW…
iDoka updated
1 month ago
-
Hi I have lilygo T-CAN 485 connected to my inverter Deye. It works very well.
Now I made seccond battery with jk BMS and I want to integrate it with Home Assistant.
JK BMS can connect with my phon…
-
Hello,
I already had opened an issue at the SoftRF Github Repository, but they sent me to you, the manufacturers of the LilyGo ESP32-S3.
https://github.com/lyusupov/SoftRF/issues/169
As state…
-
**Describe the solution you'd like**
I would like support for the T_Deck and maybe some LoRa features. The T_Deck also has stuff like a battery, speaker, microphone and a SD card
**Describe altern…
-
### Current Situation
I've gotten OOK_Receiver running, but I wondered if anyone has added display output? Essentially, it would be easier to demonstrate the program if the display showed activity.
…
-
I'm using T-Beam Supreme (M) board and trying to use the SD card with LoRa but it seems that there is a conflict to the SPI initialization. While the SD.begin() is successful and appends data on the S…